Telephone: 086-13357904980 Language:
当前位置:Home >> Product >> Solar inverter >> Power frequency inverter

Product

Tele:086-133 5790 4980
Tele:086-158 5277 8516
Tele:086-133 9518 0897
Tele:086-510-85127417
Wechat (same phone):15358098748
Website:www.tyngf.cn
QQ:1055934168
Mail box:tynpv@163.com
Address: No. 12 Industrial Park, New District, Wuxi City

25KW frequency pure spin wave inverter

25KW frequency pure spin wave inverter

1., adopt the sixth generation IPM intelligent module of Mitsubishi Co, which has high performance, stability and strong protection function. Short circuit, overload and over temperature protection are more secure and reliable, and the service life is longer than 15 years.
2. intelligent, modular design, simple structure and easy to maintain;
3. according to the condition of the product configuration, adjust the use mode of the system: the priority of the inverter or the priority of the city power bypass can be set arbitrarily.
The 4. dual mode starts the selection function. Through the liquid crystal setting, it can set up the two ways of the step-down start and the frequency conversion start. This can give full play to the power of the inverter, and no longer need to expand the capacity of the inverter with the motor and inductive load, and save the cost for the users.
The 5. output frequency can be set by itself, for example, to control the motor speed to be set to 30HZ, the inverter output 30HZ. This function is very convenient for customers to use different load types;
6. input DC voltage range can be set, such as overvoltage point, undervoltage point, overvoltage recovery point, and undervoltage recovery point can be set by liquid crystal screen. The function is convenient to increase or reduce the battery, and the PV module is used flexibly.
7. output pure sine wave, it has a good transient response less than 50MS, low waveform distortion, high inverting efficiency and stable output voltage.
8. built-in frequency isolation transformer, strong impact resistance, with motor, motor, air conditioning and other strong impact equipment. At the same time, the DC bus and AC busbar are completely isolated, and the interference between AC and DC is avoided.
9.LCD liquid crystal display can display input DC voltage, output frequency, phase voltage, phase current, power bypass voltage, output power KWH, time, temperature and fault indication.
10. using SVPWM space vector algorithm, the conversion efficiency of high conversion efficiency, high instantaneous power and low load loss can be over 93%.
11. wide input voltage according to customer requirements, the input voltage range from 100-400V, 200-500V, 300V-600V or 450-800VDC, suitable for solar / wind system without standby battery, DC input is directly connected to the solar panel / wind power generator, the switching time of online for 0 seconds;
12. this product is approved by the European CE (EMC and LVD) certification and the Australian energy network CEC.

  • Detailed description

    JAJE 25KW frequency pure spin wave inverter

    JAJE 25KW frequency pure spin wave inverter

    1., adopt the sixth generation IPM intelligent module of Mitsubishi Co, which has high performance, stability and strong protection function. Short circuit, overload and over temperature protection are more secure and reliable, and the service life is longer than 15 years.

    2. intelligent, modular design, simple structure and easy to maintain;

    3. according to the condition of the product configuration, adjust the use mode of the system: the priority of the inverter or the priority of the city power bypass can be set arbitrarily.

    The 4. dual mode starts the selection function. Through the liquid crystal setting, it can set up the two ways of the step-down start and the frequency conversion start. This can give full play to the power of the inverter, and no longer need to expand the capacity of the inverter with the motor and inductive load, and save the cost for the users.

    The 5. output frequency can be set by itself, for example, to control the motor speed to be set to 30HZ, the inverter output 30HZ. This function is very convenient for customers to use different load types;

    6. input DC voltage range can be set, such as overvoltage point, undervoltage point, overvoltage recovery point, and undervoltage recovery point can be set by liquid crystal screen. The function is convenient to increase or reduce the battery, and the PV module is used flexibly.

    7. output pure sine wave, it has a good transient response less than 50MS, low waveform distortion, high inverting efficiency and stable output voltage.

    8. built-in frequency isolation transformer, strong impact resistance, with motor, motor, air conditioning and other strong impact equipment. At the same time, the DC bus and AC busbar are completely isolated, and the interference between AC and DC is avoided.

    9.LCD liquid crystal display can display input DC voltage, output frequency, phase voltage, phase current, power bypass voltage, output power KWH, time, temperature and fault indication.

    10. using SVPWM space vector algorithm, the conversion efficiency of high conversion efficiency, high instantaneous power and low load loss can be over 93%.

    11. wide input voltage according to customer requirements, the input voltage range from 100-400V, 200-500V, 300V-600V or 450-800VDC, suitable for solar / wind system without standby battery, DC input is directly connected to the solar panel / wind power generator, the switching time of online for 0 seconds;

    12. this product is approved by the European CE (EMC and LVD) certification and the Australian energy network CEC.

    JAJE 25KW frequency pure spin wave inverter

    Model

    JJNG-25KW

    Isolation mode

    Power frequency transformer

    DC input

    Rated voltage(Vdc)

    240V

    360V

    Rated DC current (A)

    104A

    69.5A

    Input voltage range (Vdc)

    216-340V

    324-480V

    AC output

    Rated power

    25KW

    Rated voltage

    220V±3%

    380V

    output frequency

    50H/60HZ±0.05 (Can be set up )

    Fixed current(A)

    114A

    38A

    Output line system

    Single phase two line + grounding

    Three phase four wire + grounding

    Output waveform

    Pure sine wave

    Waveform distortion rate (THD)

    = 3% (linear load)

    Dynamic response (load 0--100%)

    5%,≤50ms

    power factor(PF)

    0.95

    Invert efficiency

    >93%

    Overload capacity

    150%, 10 seconds

    Insulation strength (input and output)

    1500Vac, 1 minutes

    Protection function

    Protection function

    Input reverse connection protection, undervoltage protection, overvoltage protection, output overload protection, short circuit protection, overtemperature protection

    Display mode

    LCD

    Communication function (selection)

    RS485(A、B)

    Operation mode

    Continuous operation

    Cooling mode

    Air cooling

    Short circuit protection / overload protection

    Not automatic recovery, need to restart the machine

    Working environment and mechanical size

    Protection grade

    IP20 (indoors)

    Using altitude (m)

    Less than 3000 (above 1000m derating)

    working temperature (℃)

    -15~+50

    relative humidity (℃)

    0-95% Non condensation

    noise(dB,1米)

    ≤50dB

    Reference size :(LxHxW)

    600x700x1200mm

    Reference weight (Kg)

    220Kg

    In order to better serve the customer, our company can customize the parameters of different specifications according to the needs of the user.

They are all searching: solar panels, solar modules, solar systems, solar stations, solar controllers, solar inverters